My second craft tutorial for lazy people will show you how to make a simple, abstract piece of bleach art and a matching bandana.
I spent one bleach crazy day after being inspired by this tutorial by Stars For Streetlights. Bleach is a commonly used product that usually works wonders, but it can be quite a pain when you accidentally use too much of it or drop some onto your new black dress. The lightening effect is almost immediate and it is irreversible.
Basically, this means that you should only use it on fabric that you don’t mind possibly ruining.
I had an old dark blue skirt that I was just about to send to our local thrift store. Instead, I cut it up and made 2 bandanas and 1 piece of abstract art.
What you need:
– Fabric (dark blues and blacks work best for contrasting effects)
– Empty and clean spray bottle
– A canvas that is white or that you are looking to cover up
– A sturdy stapler and some staples
– A mask and some protective glasses (if you are doing this indoors and are sensitive to the smell of bleach, protect yourself)
– If you have cuts on your hands or sensitive skin, plastic gloves
Preparing the fabric: For the bandanas, if you already have some, take these as models for size by placing them on top of the new fabric and cutting around them. If not, find some measuring tape to measure the crown of your head, where the bandana will be resting. Then, creating a square form, measure a middle diagonal that is at least 5 inches longer than what you measured around your head, so you’ll have some fabric left to tie the bandana.
For the canvas, simply put the fabric against the canvas, leaving enough fabric on each side so you’ll be able to fold it back and staple it into the sides of the canvas. Cut the extra fabric.
Bleaching it: This is best done either outdoors or in the bathroom (provided your bathroom has a window or some sort of ventilation system). In your spray bottle, mix 2/3 bleach with 1/3 water.
If you are doing this outdoors, place a piece of cardboard or something alike to protect both the fabric and the surface on which you are working.
In the bathroom, you can use clothes hangers and hang them over the bathtub so the bleach drops into it.
Once the setup is good, start the spraying. Go lightly first, so you can see the result. It takes a few minutes for the bleach to react completely.
Tip: Keep the fabric creased to create different lines and designs.
Wait for a few minutes to make sure the bleach has fully developed before throwing the pieces into the wash. Make sure to put it on ‘delicate’ because the bleach may have weakened the fabric by making it thinner.
After that, let them air dry.
The bandanas, are done, now you can set up your frame.
The following process seems a bit complex but is easy: simply put the fabric on top of the canvas and then turn it so it faces down (keeping the fabric straight). Fold some fabric from the top edge onto the back of the frame. Proceed to stapling. Do the whole top part, until you reach the corners. Fold over the fabric from the right side, covering the top corner that is already stapled. Thoroughly staple the full side, making sure that it is good and straight and that you don’t staple all the way down to the corner (fold the lower fabric over before stapling it).
The last side you staple is really important because this is where you have to make sure your garment is installed tightly enough that it won’t create folds on the canvas (though lazy me actually likes those folds provided they aren’t too obvious). Staple the final side and voila! It”s ready to hang!
Pingback: Easy crafts for lazy people: Picture magnets | A storytelling home
Pingback: Cheap art: 9 tips on how to decorate without breaking the bank | A storytelling home